DUOMAT 3

General
Technical data

Versatile drive solution for head and back section adjustment

The DUOMAT 3 is a standardised double drive for the EASY DRIVE- drive system with an externally mounted SMPS. Users benefit from the compact and stable design, the high IP protection and the ease of assembly of the device. Thanks to its characteristics, the double drive is especially well-suited for the combined head and back section adjustment.
The adjustment load is up to max. 3,500 Newton per side. The adjustment speed is up to max. 3.9 mm/sec – depending on the drive configuration at a constant 24/29 V DC and no load. On request, the drive can be equipped with a 2 x 9V battery.

Advantages at a glance

Compact and stable construction
Perfectly suited for combined head and back section adjustment
Easy assembly
High IP protection class
Load capacity: max. 3500 N on each side (for safety reasons, no pull force)
Adjustment speed: max. 3.9 mm/sec. *
Equipment options: 2 x 9 V battery

* depending on drive configuration at constant 24/29 V without load

Standard configurations

Performance data
Load capacity	max. 3500 N on each side (for safety reasons, no pull force)
Adjustment speed ¹	max. 3.9 mm/sec.
Stroke length	back rest: 69 / 87 mm leg rest: 69 / 87 mm
Fitting dimension	installation length: 708 mm component height: 120 mm axle distance: 581 mm (+/- 2 mm) axle diameter: 25 mm
Duty cycle	2/18 min. or 10 %, max. 5 switching cycles per minute
Control unit	relay control
Motor voltage	maintenance-free 24 V DC motor
Components
Limit switch	with micro switch
Housing colour	light grey RAL 7035
Connection cable	black, straight, 2350 mm, LSP-plug, PVC
SMPS	external SMPS PD 14 / PD 15
Further data
Connectivity ²	2 slave drives 1 handset
Protection type	IPX4
Protection class	III
Relative humidity	30% – 75%
Ambient temperature	+10°C - +40°C
Power supply	wide input voltage range 100-240 V AC (external SMPS PD 14/PD 15)
Safety	single-fault protected